22.2V 6000mAh 6S 100C Vant Lipo Li-Po Soft Case Battery with Deans T plug

Overview

Vant Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. Vant Batteries go through strict testing and quality control procedures in order to provide extremely accurate mAh, Voltage, and C ratings. Dont let their low cost fool you, these batteries outperform major manufacturers batteries!!

As a premium quality battery, it will get you out of the trouble and danger caused by some low-quality Li-Po Batteries.

This is a good upgrade battery if you have a RC drone, quadcopter, helicopter, car and etc. It is a battery perfect for your RC hobby items that require high power.

Vant battery is the Grade A Li-Po battery which has little or almost no chance of getting swelling or puffing like many other batteries sold online.

As a premium quality battery, it will get you out of the trouble and danger caused by some low quality Li-Po Batteries.

This is a good upgrade battery if you are running a 1/10, 1/8, 1/7 and 1/5 Scale RC Cars and Trucks. It has the capacity of 6000mAh and 100C Discharge Rate at 260A. The capacity of 6000mAh will make your car run time longer.

Features

• Hard Case for protection
• True Capacity and C-Rating
• Thick 10AWG Discharge Leads
• Deans Ultra Style T-Plug Connector
• JST-XH Balance connector

Compatible With

• HPI, Traxxas, Arrma, Maverick, HSP, Team Corrally Trucks, Buggies,
  (These vehicles may require Deans to EC5, XT90 or Traxxas converter and in some cases T-Plug Jumper for one of the ESC, XT90 or TRX battery plugs, allowing you to run just one pack)
• Most 1/10, 1/8 Buggies, 1/10, 1/8 Truggies and 1/10,1/8 Monster Trucks.
• Please check with your Speed Controls manual to determine if it can accept 14.8V 4S LiPo batteries.
• Use the size specifications below to determine if this battery will fit your application.

Specification

• Battery Chemistry: Lithium Polymer
• Voltage: 22.2V
• Configuration: 6S-IP
• Capacity: 6000mAh
• Discharge Rate(C): 100C Constant (260A) / 100C Burst (10 sec) (520A)
• Charge Rate: 2C (10.2A) Max
• Burst Discharge Rate: 200C
• Watt Hours:76.96 Wh
• Connector Type: T Plug/DeansPlug
• Balance Connector Type: JST-XH
• Length: 155mm
• Depth: 48mm
• Height: 52mm
• Battery Weight (dev.10g): 828g

Equipment Needed:LiPo Balance charger capable of charging 4 cell LiPo batteries, Or a LiPo charger with an External Balancer

Safety Notes

1. To ensure safety, please check and confirm Li-Po battery surface and voltage is normal before using.
2. If the new Li-Po battery wont hold a full charge or loose charge very quickly in short time, then please use a Professional Li-po battery Charger to charge and recycle several times first. (See our Li-Po Balance charges from $95 upwards.
3. For most Li-Po battery, the safest charge rate is 1C 2C.
4. Never Over-charge above 4.2V per cell and Over-discharge below 3.2V per cell. (Normal cell voltage is between 3.7V~4.2V).
5. When charging with a professional balance charger, always charge the battery 100-200mAh less than the amperage of the battery. For example if the battery is 5000mah then charge at 4900mah.
6. Never charge Li-Po battery unattended.
7. If you are not using the battery for a while, please plug the battery off the car and leave it at the storage charge voltage which is 3.85v for each cell.

Safety Notes & Warnings:

• LiPo batteries are potentially hazardous. Improper usage can cause fire or explosion
• Charge and Store battery in LiPo-Safe Bag away from flammables on a concrete surface
• Charge using a LiPo compatible Balance Charger ONLY!
• Never Charge above 4.2V per cell
• Never Discharge below 3.2V per cell
• Always use under adult supervision
• Store the battery in a place not accessible by children or infants
• Do not short the batterys positive and negative terminals
• The end-user is fully responsible for any results in using this battery pack